How to Clean Coils On Whirlpool side By side Refrigerator?

How to Clean the Coils on a Whirlpool Side-by-Side Refrigerator

Your Whirlpool side-by-side refrigerator is a workhorse, keeping your food fresh and cold for days on end. But over time, the coils on the back of the refrigerator can become dirty and clogged with dust, lint, and other debris. This can reduce the efficiency of your refrigerator and make it work harder to keep your food cold.

Cleaning the coils on your Whirlpool side-by-side refrigerator is a relatively simple task that you can do yourself in just a few minutes. By following these steps, you can keep your refrigerator running at its best and extend its lifespan.

What You’ll Need:

• A dry cloth or microfiber cloth
• A vacuum cleaner with a crevice tool
• A can of compressed air
• A brush or soft cloth
• A bucket of warm water
• A mild detergent

Step-by-Step Instructions:

1. Turn off the refrigerator and unplug it from the wall.
2. Remove the back panel of the refrigerator. This is usually held in place by a few screws or clips.
3. Use the vacuum cleaner to remove any dust or debris from the coils. Be careful not to damage the coils.
4. Use the compressed air to blow away any remaining dust or debris.
5. Wipe the coils down with a dry cloth or microfiber cloth.
6. Reattach the back panel of the refrigerator.
7. Plug the refrigerator back in and turn it on.

Your Whirlpool side-by-side refrigerator is now clean and ready to keep your food fresh and cold for years to come.

“`html

Step	Instructions	Image
1	Unplug the refrigerator
2	Locate the coils
3	Remove the cover
4	Clean the coils
5	Replace the cover
6	Plug in the refrigerator

“`

Tools and Materials Needed

To clean the coils on your Whirlpool side-by-side refrigerator, you will need the following tools and materials:

• A screwdriver
• A vacuum cleaner with a brush attachment
• A dry cloth
• Rubbing alcohol
• Baking soda
• Water

Steps to Clean the Coils

1. Turn off the refrigerator and unplug it from the wall.
2. Locate the coils. The coils are usually located on the back of the refrigerator, behind a panel.
3. Remove the panel. Use the screwdriver to remove the screws that hold the panel in place.
4. Vacuum the coils. Use the vacuum cleaner with the brush attachment to vacuum the coils. Be careful not to damage the coils.
5. Wipe the coils with a dry cloth. Use a dry cloth to wipe the coils clean.
6. Apply rubbing alcohol to a cloth. Dip a cloth in rubbing alcohol and wipe the coils clean. This will help to remove any grease or dirt that may be on the coils.
7. Sprinkle baking soda on the coils. Sprinkle baking soda on the coils. This will help to absorb any odors.
8. Let the baking soda sit for 15 minutes. Let the baking soda sit for 15 minutes. This will give it time to absorb any odors.
9. Wipe the coils with a dry cloth. Use a dry cloth to wipe the coils clean.
10. Replace the panel. Replace the panel and screw it back into place.
11. Plug the refrigerator back into the wall and turn it on.

Your refrigerator coils are now clean!

Cleaning the coils on your Whirlpool side-by-side refrigerator is an important part of maintaining your refrigerator. By following these steps, you can keep your refrigerator running efficiently and prevent it from breaking down.

Here are some additional tips for cleaning your refrigerator coils:

• Clean the coils every 6 months or so.
• If the coils are very dirty, you may need to clean them more often.
• Be careful not to damage the coils when you are cleaning them.
• If you are not comfortable cleaning the coils yourself, you can hire a professional to do it for you.

How to Clean Coils On Whirlpool side By side Refrigerator?

1. Gather your supplies

To clean the coils on your Whirlpool side by side refrigerator, you will need the following supplies:

• A vacuum cleaner with a brush attachment
• A can of compressed air
• A damp cloth
• A dry cloth
• A screwdriver

2. Turn off the refrigerator

Before you begin cleaning the coils, you will need to turn off the refrigerator. This will prevent you from accidentally getting shocked. To turn off the refrigerator, unplug it from the wall outlet.

Note:

If your refrigerator has a built-in ice maker, you will also need to turn off the water supply to the refrigerator. To do this, locate the water supply valve behind the refrigerator. Turn the valve clockwise to turn off the water supply.

3. Unplug the refrigerator

Once you have turned off the refrigerator, you will need to unplug it from the wall outlet. This will prevent you from accidentally getting shocked while you are cleaning the coils.

4. Remove the back panel of the refrigerator

To remove the back panel of the refrigerator, you will need to locate the screws that hold it in place. These screws are typically located on the top and bottom of the panel. Once you have located the screws, use a screwdriver to remove them.

Note:

Be careful not to lose the screws. You will need them to reinstall the back panel when you are finished cleaning the coils.

5. Vacuum the coils

Once you have removed the back panel of the refrigerator, you can begin vacuuming the coils. Use the brush attachment on your vacuum cleaner to remove any dust or debris that is on the coils. Be sure to vacuum both the top and bottom of the coils.

6. Use compressed air to clean the coils

After you have vacuumed the coils, you can use compressed air to clean them further. Hold the can of compressed air upright and spray the coils until they are clean. Be sure to spray both the top and bottom of the coils.

7. Wipe the coils with a damp cloth

After you have used compressed air to clean the coils, you can wipe them down with a damp cloth. This will help to remove any remaining dust or debris. Be sure to dry the coils completely before you reinstall the back panel of the refrigerator.

8. Reinstall the back panel of the refrigerator

Once you have cleaned the coils, you can reinstall the back panel of the refrigerator. To do this, simply reverse the steps that you took to remove the panel. Be sure to tighten the screws securely so that the panel is held in place properly.

9. Turn on the refrigerator

Once you have reinstalled the back panel of the refrigerator, you can turn on the refrigerator. The refrigerator should now be properly cooled and the coils should be clean.

Cleaning the coils on your Whirlpool side by side refrigerator is an important task that should be done regularly. By following these steps, you can easily clean the coils and keep your refrigerator running efficiently.

Additional tips

• To prevent the coils from becoming dirty in the first place, you can regularly vacuum the area behind the refrigerator.
• If the coils are very dirty, you may need to use a brush attachment on your vacuum cleaner to remove the dirt.
• Be careful not to touch the coils with your bare hands. The coils are hot and can cause burns.
• If you are not comfortable cleaning the coils yourself, you can call a qualified appliance repair technician to do the job for you.

  How often should I clean the coils on my Whirlpool side-by-side refrigerator?

The coils on your Whirlpool side-by-side refrigerator should be cleaned every 6 months to 1 year. If you use your refrigerator frequently or if you live in a humid climate, you may need to clean the coils more often.

What do I need to clean the coils on my Whirlpool side-by-side refrigerator?

You will need the following items to clean the coils on your Whirlpool side-by-side refrigerator:

• A vacuum cleaner with a crevice tool
• A dry cloth
• A can of compressed air
• A degreaser

How do I clean the coils on my Whirlpool side-by-side refrigerator?

1. Unplug the refrigerator from the power outlet.
2. Remove the kickplate from the bottom of the refrigerator.
3. Use the crevice tool to vacuum the coils.
4. Use the dry cloth to wipe away any dust or debris that the vacuum cleaner missed.
5. Spray the coils with a degreaser and let it sit for a few minutes.
6. Use the compressed air to blow away the degreaser and any remaining dirt or debris.
7. Replace the kickplate.
8. Plug the refrigerator back into the power outlet.

What should I do if I accidentally get water on the coils on my Whirlpool side-by-side refrigerator?

If you accidentally get water on the coils on your Whirlpool side-by-side refrigerator, simply dry it off with a dry cloth. Be careful not to touch the coils with your bare hands, as they can be hot.

What happens if I don’t clean the coils on my Whirlpool side-by-side refrigerator?

If you don’t clean the coils on your Whirlpool side-by-side refrigerator, the refrigerator will not be able to cool properly. This can lead to a number of problems, including:

• Increased energy consumption
• Food spoilage
• A build-up of frost on the evaporator coils
• A decrease in the refrigerator’s lifespan

By following the steps above, you can help to keep your Whirlpool side-by-side refrigerator running efficiently and prolong its lifespan.

cleaning the coils on your Whirlpool side-by-side refrigerator is a relatively simple task that can be completed in just a few minutes. By following the steps outlined in this guide, you can help to ensure that your refrigerator is running efficiently and effectively, and that your food is being properly cooled.

Here are a few key takeaways to remember:

• The coils are located on the back of the refrigerator, behind the kickplate.
• To clean the coils, you will need a vacuum cleaner with a brush attachment, a dry cloth, and some rubbing alcohol.
• Turn off the refrigerator and unplug it from the wall before you begin cleaning.
• Vacuum the coils to remove any dust or debris.
• Use the dry cloth to wipe down the coils.
• Apply a small amount of rubbing alcohol to the cloth and wipe down the coils again.
• Allow the coils to air dry completely before replacing the kickplate.

By following these steps, you can help to keep your Whirlpool side-by-side refrigerator running smoothly and efficiently for years to come.