Subaru Outback Disable Power Liftgate

Subaru Outback: How to Disable the Power Liftgate

The power liftgate on the Subaru Outback is a convenient feature that can make loading and unloading cargo easier. However, there may be times when you need to disable the power liftgate, such as when you’re in a tight parking spot or when you’re carrying something that might be damaged by the liftgate.

In this article, we’ll show you how to disable the power liftgate on the Subaru Outback in just a few simple steps.

Step 1: Locate the Power Liftgate Switch

The power liftgate switch is located on the driver’s side door panel, just below the window. It’s a small, black button with a picture of a liftgate on it.

Step 2: Press and Hold the Power Liftgate Switch

To disable the power liftgate, press and hold the power liftgate switch for about five seconds. The liftgate will stop working, and the button will light up red.

Step 3: To Re-Enable the Power Liftgate

To re-enable the power liftgate, simply press the power liftgate switch again. The liftgate will start working again, and the button will turn off.

That’s all there is to it! Now you know how to disable the power liftgate on your Subaru Outback.

Step Action Notes
1 Open the rear hatch. The power liftgate will be disabled.
2 Press and hold the “Liftgate” button on the inside of the rear hatch for 5 seconds. The power liftgate will be re-enabled.

How to Disable the Power Liftgate on a Subaru Outback

The power liftgate on a Subaru Outback is a convenient feature, but it can also be a source of problems. If the liftgate is not working properly, it can be dangerous and inconvenient. If you need to disable the power liftgate on your Subaru Outback, you can do so by following these steps:

1. Open the trunk and locate the power liftgate fuse. The fuse is typically located in the fuse box under the hood.
2. Remove the fuse from the fuse box.
3. The power liftgate will now be disabled.

Note: If you ever need to reenable the power liftgate, you can simply replace the fuse in the fuse box.

How to Reenable the Power Liftgate on a Subaru Outback

To reenable the power liftgate on your Subaru Outback, simply follow these steps:

1. Locate the power liftgate fuse in the fuse box under the hood.
2. Replace the fuse with a new fuse of the same amperage.
3. The power liftgate will now be reenabled.

Note: If you are unsure of the correct amperage for the power liftgate fuse, you can consult your Subaru Outback owner’s manual.

Disabling and reenabling the power liftgate on a Subaru Outback is a relatively simple task that can be completed in a few minutes. If you need to disable the power liftgate for any reason, you can do so by following the steps outlined in this guide.

How to Disable the Power Liftgate on a Subaru Outback

The power liftgate on a Subaru Outback is a convenient feature, but it can also be a nuisance if it malfunctions. If the power liftgate on your Subaru Outback is not working properly, you may need to disable it. Disabling the power liftgate will allow you to open and close the trunk manually.

To disable the power liftgate on a Subaru Outback, follow these steps:

1. Open the hood of your Subaru Outback.
2. Locate the fuse box. The fuse box is typically located on the driver’s side of the engine compartment.
3. Find the fuse for the power liftgate. The fuse for the power liftgate is typically labeled “Liftgate” or “Power Liftgate.”
4. Remove the fuse for the power liftgate.
5. Close the hood of your Subaru Outback.

The power liftgate is now disabled. You can now open and close the trunk manually.

To enable the power liftgate, follow these steps:

1. Open the hood of your Subaru Outback.
2. Locate the fuse box. The fuse box is typically located on the driver’s side of the engine compartment.
3. Find the fuse for the power liftgate. The fuse for the power liftgate is typically labeled “Liftgate” or “Power Liftgate.”
4. Insert the fuse for the power liftgate.
5. Close the hood of your Subaru Outback.

The power liftgate is now enabled.

Things to Keep in Mind When Disabling the Power Liftgate

  • The power liftgate is a convenient feature, so you may want to consider disabling it only when you need to.
  • Disabling the power liftgate may make it more difficult to open and close the trunk.
  • If you have a keyless entry system, you may not be able to open the trunk with your key fob.

Troubleshooting

  • If the power liftgate is not working after you have disabled it, check the fuse to make sure it is still in place.
  • If the fuse is in place, try replacing it with a new fuse.
  • If the power liftgate is still not working, you may need to take your Subaru Outback to a dealer for service.

Disabling the power liftgate on a Subaru Outback is a relatively simple process. By following the steps in this guide, you can easily disable the power liftgate and open and close the trunk manually.

Q: How do I disable the power liftgate on my Subaru Outback?

A: There are two ways to disable the power liftgate on your Subaru Outback.

1. Using the key fob:
1. Press and hold the lock button on the key fob for two seconds.
2. The power liftgate will beep and the lights will flash to confirm that it has been disabled.
2. Using the interior switch:
1. Open the tailgate.
2. Press and hold the power liftgate button for two seconds.
3. The power liftgate will beep and the lights will flash to confirm that it has been disabled.

Q: Why would I want to disable the power liftgate?

A: There are a few reasons why you might want to disable the power liftgate on your Subaru Outback.

  • If you have a child or pet in the back seat, you can disable the power liftgate to prevent them from accidentally opening it.
  • If you live in an area with a lot of snow or ice, you can disable the power liftgate to prevent it from getting stuck.
  • If you’re concerned about the power liftgate breaking down, you can disable it to prevent any potential damage.

Q: What are the risks of disabling the power liftgate?

A: There are a few risks associated with disabling the power liftgate on your Subaru Outback.

  • If you need to open the tailgate quickly, you may not be able to do so if the power liftgate is disabled.
  • If you have a heavy load in the back of your Outback, you may not be able to lift the tailgate manually.
  • If you’re not careful, you could damage the tailgate by opening it incorrectly.

Q: How do I enable the power liftgate again?

A: To enable the power liftgate on your Subaru Outback, simply follow the same steps you used to disable it.

1. Using the key fob:
1. Press and hold the lock button on the key fob for two seconds.
2. The power liftgate will beep and the lights will flash to confirm that it has been enabled.
2. Using the interior switch:
1. Open the tailgate.
2. Press and hold the power liftgate button for two seconds.
3. The power liftgate will beep and the lights will flash to confirm that it has been enabled.

In this blog post, we have discussed how to disable the power liftgate on a Subaru Outback. We have provided step-by-step instructions on how to do this, as well as some tips on troubleshooting if you encounter any problems. We hope that this information has been helpful to you. If you have any further questions, please do not hesitate to contact us.

Author Profile

PST Converter Team
PST Converter Team
With a small office in 18 Ely Place, 2nd Floor, New York, NY – 10006, our journey began with a simple yet powerful vision: to make technology work for people, not the other way around.

From 2019 to 2022, we specialized in providing a seamless ‘PST to Mbox’ Converter service, a niche but crucial tool for countless professionals and individuals. Our dedicated team worked tirelessly to ensure that your data migration needs were met with efficiency and ease. It was a journey filled with learning, growth, and an unwavering commitment to our clients.

In 2023, we embraced a pivotal shift. While our roots in data conversion are strong, we realized our potential to impact a broader audience. We expanded our horizons to address a more diverse array of tech challenges. Today, we are more than just a service provider; we are a hub of knowledge and solutions.

Our focus now is on delivering in-depth articles, insightful content, and answers to queries that are hard to find or often misunderstood. We understand the frustration of searching for reliable information in the vast ocean of the internet. That’s why we’re here to be your compass, guiding you to accurate, trustworthy, and valuable insights.

Similar Posts