How to Clean Waterpik Cordless Plus?

How to Clean Your Waterpik Cordless Plus

Your Waterpik Cordless Plus is a powerful tool for cleaning your teeth and gums, but it’s important to clean it regularly to prevent the growth of bacteria and mold. By following these simple steps, you can keep your Waterpik Cordless Plus in top condition and ensure that it’s always working its best.

Step 1: Rinse the Waterpik Head

The first step to cleaning your Waterpik Cordless Plus is to rinse the waterpik head under running water. This will remove any loose debris or toothpaste residue.

Step 2: Disassemble the Waterpik Head

Next, you’ll need to disassemble the waterpik head so that you can clean all of the parts. To do this, simply twist the head counter-clockwise until it comes apart.

Step 3: Clean the Waterpik Head with a Toothbrush

Now that the waterpik head is disassembled, you can use a toothbrush to clean the inside and outside of the head. Be sure to get into all of the nooks and crannies where bacteria can hide.

Step 4: Soak the Waterpik Head in a Cleaning Solution

After you’ve cleaned the waterpik head with a toothbrush, it’s time to soak it in a cleaning solution. You can use a commercial cleaning solution or make your own solution by mixing equal parts white vinegar and water.

Step 5: Rinse and Dry the Waterpik Head

Once the waterpik head has soaked in the cleaning solution for at least 5 minutes, rinse it thoroughly with warm water. Then, dry the head with a clean towel.

Step 6: Reassemble the Waterpik Head

Finally, you can reassemble the waterpik head and attach it to the Waterpik Cordless Plus. Now your Waterpik Cordless Plus is clean and ready to use!

“`html

Step Instructions Tips
1 Fill the Waterpik reservoir with equal parts white vinegar and water. Use distilled or filtered water to avoid mineral buildup.
2 Turn on the Waterpik and run the solution through the unit for 30 seconds. Be sure to hold the tip over a sink or drain.
3 Rinse the reservoir and tip thoroughly with warm water. You can also use a toothbrush to clean the tip.
4 Dry the Waterpik with a soft cloth. Do not store the Waterpik in a humid environment.

“`

Disassembling the Waterpik Cordless Plus

To disassemble the Waterpik Cordless Plus, you will need the following tools:

  • A Phillips head screwdriver
  • A flathead screwdriver

1. Turn off the Waterpik Cordless Plus and unplug it from the electrical outlet.
2. Remove the two Phillips head screws on the bottom of the unit.
3. Use the flathead screwdriver to pry open the back cover.
4. Remove the battery pack by pulling it straight out of the unit.
5. Remove the water tank by pulling it straight out of the unit.
6. Remove the air filter by pulling it straight out of the unit.
7. Rinse all of the parts with warm water and dish soap.
8. Dry all of the parts with a towel.
9. Reassemble the Waterpik Cordless Plus.

Cleaning the Waterpik Cordless Plus

To clean the Waterpik Cordless Plus, you will need the following supplies:

  • A clean cloth
  • A bottle of white vinegar
  • A bottle of water

1. Turn off the Waterpik Cordless Plus and unplug it from the electrical outlet.
2. Fill the water tank with equal parts white vinegar and water.
3. Attach the water tank to the unit.
4. Turn on the Waterpik Cordless Plus and let it run for 30 seconds.
5. Turn off the Waterpik Cordless Plus and unplug it from the electrical outlet.
6. Use the clean cloth to wipe down the exterior of the unit.
7. Rinse the water tank with warm water.
8. Dry all of the parts with a towel.

Additional Tips

  • To prevent build-up of calcium and mineral deposits, clean the Waterpik Cordless Plus once a week.
  • If you use distilled water in the Waterpik Cordless Plus, you will not need to clean it as often.
  • If the Waterpik Cordless Plus is not working properly, you may need to clean the air filter. To clean the air filter, remove it from the unit and rinse it with warm water.

By following these steps, you can easily clean your Waterpik Cordless Plus and keep it in good working order.

How to Clean Waterpik Cordless Plus?

The Waterpik Cordless Plus is a great way to keep your teeth and gums clean, but it’s important to clean it regularly to prevent the growth of bacteria. Here’s how to clean your Waterpik Cordless Plus:

1. Turn off the Waterpik and unplug it from the outlet.
2. Remove the water tank and fill it with a mixture of equal parts white vinegar and water.
3. Swirl the water tank around to loosen any debris.
4. Rinse the water tank thoroughly with warm water.
5. Replace the water tank.
6. Use a soft-bristled brush to clean the exterior of the Waterpik.
7. Wipe the Waterpik down with a damp cloth.
8. Reassemble the Waterpik.

Tips for Cleaning Your Waterpik Cordless Plus:

  • Clean the Waterpik once a week to prevent the growth of bacteria.
  • Use a mild detergent to clean the Waterpik if it becomes dirty.
  • Do not use abrasive cleaners or solvents on the Waterpik, as they can damage the surface.
  • Avoid getting water inside the motor of the Waterpik, as this can damage it.

Troubleshooting

If your Waterpik Cordless Plus is not working properly, here are a few things you can check:

  • Make sure that the Waterpik is plugged in and turned on.
  • Check the water tank to make sure that it is filled with water.
  • Try cleaning the Waterpik according to the instructions above.
  • If the problem persists, contact customer service for assistance.

Reassembling the Waterpik Cordless Plus

To reassemble the Waterpik Cordless Plus, follow these steps:

1. Align the water tank with the base of the Waterpik.
2. Press down on the water tank until it snaps into place.
3. Insert the power cord into the port on the back of the Waterpik.
4. Turn on the Waterpik and select your desired cleaning mode.

Tips for Reassembling Your Waterpik Cordless Plus:

  • Make sure that the water tank is properly aligned with the base of the Waterpik before pressing down on it.
  • If the water tank is not properly aligned, it may not snap into place and could leak water.
  • Make sure that the power cord is securely inserted into the port on the back of the Waterpik.
  • If the power cord is not securely inserted, the Waterpik may not turn on.

Troubleshooting

If your Waterpik Cordless Plus is not working properly, here are a few things you can check:

  • Make sure that the Waterpik is plugged in and turned on.
  • Check the water tank to make sure that it is filled with water.
  • Try cleaning the Waterpik according to the instructions above.
  • If the problem persists, contact customer service for assistance.

    How often should I clean my Waterpik Cordless Plus?

You should clean your Waterpik Cordless Plus after every use. This will help to prevent the build-up of bacteria and keep your Waterpik working properly.

What is the best way to clean my Waterpik Cordless Plus?

To clean your Waterpik Cordless Plus, follow these steps:

1. Remove the water tank and fill it with equal parts white vinegar and water.
2. Insert the water tank back into the Waterpik and turn it on.
3. Allow the Waterpik to run for 30 seconds.
4. Turn off the Waterpik and empty the water tank.
5. Rinse the water tank and Waterpik with warm water.
6. Dry the water tank and Waterpik with a soft cloth.

Can I use any cleaning solution to clean my Waterpik Cordless Plus?

No, you should not use any cleaning solution other than white vinegar and water to clean your Waterpik Cordless Plus. Some cleaning solutions can damage the plastic parts of the Waterpik.

How do I clean the Waterpik’s nozzle?

To clean the Waterpik’s nozzle, follow these steps:

1. Remove the nozzle from the Waterpik.
2. Soak the nozzle in a solution of equal parts white vinegar and water for 30 minutes.
3. Rinse the nozzle with warm water.
4. Dry the nozzle with a soft cloth.

How do I prevent my Waterpik Cordless Plus from getting clogged?

To prevent your Waterpik Cordless Plus from getting clogged, follow these tips:

  • Rinse the Waterpik after every use.
  • Clean the Waterpik regularly with white vinegar and water.
  • Do not use the Waterpik with tap water that is hard or contains a lot of minerals.
  • Avoid using the Waterpik if you have a cold or sore throat.

What if my Waterpik Cordless Plus is still clogged after I have cleaned it?

If your Waterpik Cordless Plus is still clogged after you have cleaned it, you can try the following:

1. Soak the nozzle in a solution of 1 part hydrogen peroxide and 3 parts water for 30 minutes.
2. Use a pipe cleaner to gently clear the obstruction.
3. If the obstruction is severe, you may need to take the Waterpik to a service center for repairs.

cleaning your Waterpik Cordless Plus is a simple and easy task that can be done in just a few minutes. By following the steps outlined in this article, you can keep your Waterpik Cordless Plus in good working order and ensure that it provides you with years of clean, healthy teeth.

Here are the key takeaways:

  • Use a clean, dry cloth to wipe down the exterior of the Waterpik Cordless Plus.
  • Remove the water tank and fill it with a mixture of equal parts white vinegar and water.
  • Soak the water tank in the vinegar solution for 10 minutes.
  • Rinse the water tank thoroughly with warm water.
  • Reattach the water tank to the Waterpik Cordless Plus.
  • Run the Waterpik Cordless Plus on the highest setting for 10 seconds to flush out any remaining vinegar solution.

By following these steps, you can keep your Waterpik Cordless Plus clean and free of bacteria, mold, and other contaminants. This will help to ensure that your Waterpik Cordless Plus is working properly and that it is providing you with the best possible oral care.

Author Profile

PST Converter Team
PST Converter Team
With a small office in 18 Ely Place, 2nd Floor, New York, NY – 10006, our journey began with a simple yet powerful vision: to make technology work for people, not the other way around.

From 2019 to 2022, we specialized in providing a seamless ‘PST to Mbox’ Converter service, a niche but crucial tool for countless professionals and individuals. Our dedicated team worked tirelessly to ensure that your data migration needs were met with efficiency and ease. It was a journey filled with learning, growth, and an unwavering commitment to our clients.

In 2023, we embraced a pivotal shift. While our roots in data conversion are strong, we realized our potential to impact a broader audience. We expanded our horizons to address a more diverse array of tech challenges. Today, we are more than just a service provider; we are a hub of knowledge and solutions.

Our focus now is on delivering in-depth articles, insightful content, and answers to queries that are hard to find or often misunderstood. We understand the frustration of searching for reliable information in the vast ocean of the internet. That’s why we’re here to be your compass, guiding you to accurate, trustworthy, and valuable insights.

Similar Posts