How to Clean A Whirlpool Front Load Washer?

How to Clean a Whirlpool Front Load Washer

Your Whirlpool front load washer is a workhorse, keeping your clothes clean and fresh day after day. But even the best washers need a little TLC every now and then. By following these simple steps, you can keep your washer running smoothly and prevent costly repairs.

What you’ll need:

  • A mild detergent
  • A cup of white vinegar
  • A hose
  • A bucket
  • A scrub brush
  • A dry towel

Step-by-step instructions:

1. Empty the washer. Remove all of the clothes from the washer and check the lint trap. If the lint trap is full, clean it out before proceeding.
2. Turn off the washer and unplug it.
3. Mix a solution of 1 cup of white vinegar and 1 gallon of water.
4. Pour the solution into the detergent dispenser.
5. Turn on the washer and set it to the “Normal” cycle.
6. Allow the washer to complete the cycle.
7. Turn off the washer and unplug it.
8. Use a hose to rinse out the inside of the washer.
9. Use a scrub brush to clean the rubber gasket around the door.
10. Wipe down the inside of the washer with a dry towel.

Your washer is now clean and fresh! By following these simple steps, you can help extend the life of your washer and keep your clothes looking their best.

Step Instructions Tips
1 Empty the washer and remove the detergent dispenser. Be sure to remove all detergent pods or liquid from the dispenser.
2 Wipe down the inside of the drum with a damp cloth. Use a mild detergent or vinegar to clean the drum.
3 Clean the detergent dispenser with a toothbrush. Use a toothbrush to scrub the dispenser and remove any buildup.
4 Run a cleaning cycle with hot water and vinegar. This will help to remove any remaining dirt or grime.
5 Wipe down the exterior of the washer with a damp cloth. Be sure to dry the washer completely before using it again.

Your Whirlpool front-load washer is an important appliance that keeps your clothes clean and fresh. But over time, it can accumulate dirt, grime, and soap scum. If you don’t clean your washer regularly, it can start to perform less efficiently and even damage your clothes.

This guide will show you how to clean your Whirlpool front-load washer in just a few simple steps. By following these steps, you can keep your washer running smoothly and extend its lifespan.

Gather Supplies

To clean your Whirlpool front-load washer, you will need the following supplies:

  • Detergent
  • White vinegar
  • Baking soda
  • Soft cloth
  • Sponge
  • Bucket
  • Towels

Remove the Detergent Drawer

The first step to cleaning your Whirlpool front-load washer is to remove the detergent drawer. To do this, follow these steps:

1. Open the detergent drawer.
2. Pull out the drawer until it is fully extended.
3. Remove the detergent cup.
4. Rinse the detergent cup with warm water.
5. Dry the detergent cup with a towel.

Clean the Detergent Drawer

Now that you have removed the detergent drawer, you can clean it. To do this, follow these steps:

1. Fill a bucket with warm water and add a little bit of detergent.
2. Dip a sponge into the soapy water and scrub the inside of the detergent drawer.
3. Rinse the detergent drawer with warm water.
4. Dry the detergent drawer with a towel.

Clean the Washer Drum

The next step is to clean the washer drum. To do this, follow these steps:

1. Add 1 cup of white vinegar to the detergent dispenser.
2. Add 1 cup of baking soda to the drum.
3. Turn on the washer and select the “Normal” cycle.
4. Allow the washer to complete the cycle.

The vinegar and baking soda will help to remove dirt, grime, and soap scum from the washer drum.

Clean the Door Seal

The door seal on your Whirlpool front-load washer is a common area for dirt and grime to accumulate. To clean the door seal, follow these steps:

1. Remove the door from the washer.
2. Dip a sponge into warm water and add a little bit of detergent.
3. Scrub the inside and outside of the door seal.
4. Rinse the door seal with warm water.
5. Dry the door seal with a towel.

Clean the Exterior of the Washer

The final step is to clean the exterior of the washer. To do this, follow these steps:

1. Use a soft cloth to wipe down the exterior of the washer.
2. Use a damp cloth to wipe down the control panel.
3. Dry the exterior of the washer with a towel.

By following these steps, you can easily clean your Whirlpool front-load washer and keep it running smoothly for years to come.

Here are some additional tips for cleaning your Whirlpool front-load washer:

  • Clean the washer every month or two to prevent dirt and grime from building up.
  • Use a mild detergent and warm water to clean the washer.
  • Avoid using harsh chemicals or abrasive cleaners, as they can damage the washer.
  • If you have hard water, you may need to clean the washer more often.
  • If you have a pet, you may need to clean the washer more often.

By following these tips, you can keep your Whirlpool front-load washer clean and functioning properly.

3. Clean the Detergent Drawer

The detergent drawer is a common area for buildup of dirt, detergent residue, and mold. To clean the detergent drawer, you will need:

  • A bucket
  • Warm water
  • White vinegar
  • A sponge

1. Fill a bucket with warm water.
2. Add 1 cup of white vinegar to the bucket.
3. Dip a sponge into the solution.
4. Wipe down the inside of the detergent drawer.
5. Rinse the detergent drawer with warm water.
6. Dry the detergent drawer with a towel.

The detergent drawer should now be clean and free of dirt, detergent residue, and mold.

4. Clean the Washer Drum

The washer drum is another common area for buildup of dirt, detergent residue, and mold. To clean the washer drum, you will need:

  • A bucket
  • Warm water
  • Baking soda
  • A soft cloth

1. Fill the washer drum with warm water.
2. Add 1 cup of baking soda to the water.
3. Turn on the washer and let it run for a cycle.
4. After the cycle is complete, drain the water from the washer drum.
5. Wipe down the inside of the washer drum with a soft cloth.
6. Dry the inside of the washer drum with a towel.

The washer drum should now be clean and free of dirt, detergent residue, and mold.

5. Clean the Hoses

The hoses on your washing machine can also become clogged with dirt, detergent residue, and mold. To clean the hoses, you will need:

  • A bucket
  • Warm water
  • A hose brush

1. Fill a bucket with warm water.
2. Dip the hose brush into the water.
3. Scrub the inside of the hoses.
4. Rinse the hoses with warm water.
5. Dry the hoses with a towel.

The hoses should now be clean and free of dirt, detergent residue, and mold.

6. Clean the Filter

The filter on your washing machine traps lint and other debris. To clean the filter, you will need:

  • A bucket
  • Warm water
  • A hose brush

1. Remove the filter from the washing machine.
2. Fill a bucket with warm water.
3. Dip the hose brush into the water.
4. Scrub the filter.
5. Rinse the filter with warm water.
6. Dry the filter with a towel.

The filter should now be clean and free of lint and other debris.

7. Clean the Exterior of the Washer

The exterior of your washing machine can also become dirty. To clean the exterior, you will need:

  • A bucket
  • Warm water
  • A mild detergent
  • A sponge

1. Fill a bucket with warm water.
2. Add a mild detergent to the water.
3. Dip a sponge into the solution.
4. Wipe down the exterior of the washing machine.
5. Rinse the washing machine with warm water.
6. Dry the washing machine with a towel.

The exterior of the washing machine should now be clean.

8. Prevent Future Buildup

To prevent future buildup in your washing machine, you can:

  • Use the correct amount of detergent.
  • Rinse the clothes thoroughly before putting them in the washing machine.
  • Clean the washing machine regularly.

By following these tips, you can help to keep your washing machine clean and functioning properly.

By following these steps, you can easily clean your Whirlpool front load washer. A clean washing machine will help to ensure that your clothes are clean and free of dirt, detergent residue, and mold.

How often should I clean my Whirlpool front load washer?

  • Answer: Every 3-4 months, or more often if you have hard water.

What do I need to clean my Whirlpool front load washer?

  • Answer: You will need:
  • A mild detergent
  • A descaling solution (such as white vinegar or a commercial descaler)
  • A brush or sponge
  • A bucket
  • Warm water

How do I clean the inside of my Whirlpool front load washer?

  • Answer:

1. Empty the washer and remove the detergent dispenser.
2. Mix a solution of 1 cup of white vinegar and 1 gallon of warm water in a bucket.
3. Pour the solution into the detergent dispenser and close the door.
4. Turn on the washer and select the longest wash cycle with hot water.
5. Let the washer complete the cycle.
6. Open the door and pour 1 cup of white vinegar into the empty drum.
7. Use a brush or sponge to scrub the inside of the drum.
8. Rinse the inside of the drum with warm water.
9. Dry the inside of the drum with a towel.

How do I clean the outside of my Whirlpool front load washer?

  • Answer:

1. Wipe down the exterior of the washer with a damp cloth.
2. Use a descaling solution to clean any hard water stains.
3. Be sure to dry the exterior of the washer completely before using it again.

What should I do if my Whirlpool front load washer is not draining properly?

  • Answer:

1. Check the drain hose to make sure it is not clogged.
2. Clean the lint filter.
3. Check the water level in the tub.
4. If the problem persists, contact a qualified technician.

What should I do if my Whirlpool front load washer is making a strange noise?

  • Answer:

1. Check the door to make sure it is closed properly.
2. Check the water level in the tub.
3. Listen for any unusual noises coming from the washer.
4. If the problem persists, contact a qualified technician.

cleaning your Whirlpool front load washer is an important task that can help to extend the lifespan of your appliance and keep your clothes clean and fresh. By following the steps in this guide, you can easily and effectively clean your washer, leaving it looking and performing like new.

Here are some key takeaways to remember:

  • Clean the exterior of your washer regularly with a mild detergent and water.
  • Descale the interior of your washer every 3-6 months with a descaling solution.
  • Clean the lint filter after every use.
  • Clean the detergent dispenser every month.
  • Inspect the hoses and seals for leaks regularly and replace them as needed.

By following these tips, you can keep your Whirlpool front load washer in good working order for years to come.

Author Profile

PST Converter Team
PST Converter Team
With a small office in 18 Ely Place, 2nd Floor, New York, NY – 10006, our journey began with a simple yet powerful vision: to make technology work for people, not the other way around.

From 2019 to 2022, we specialized in providing a seamless ‘PST to Mbox’ Converter service, a niche but crucial tool for countless professionals and individuals. Our dedicated team worked tirelessly to ensure that your data migration needs were met with efficiency and ease. It was a journey filled with learning, growth, and an unwavering commitment to our clients.

In 2023, we embraced a pivotal shift. While our roots in data conversion are strong, we realized our potential to impact a broader audience. We expanded our horizons to address a more diverse array of tech challenges. Today, we are more than just a service provider; we are a hub of knowledge and solutions.

Our focus now is on delivering in-depth articles, insightful content, and answers to queries that are hard to find or often misunderstood. We understand the frustration of searching for reliable information in the vast ocean of the internet. That’s why we’re here to be your compass, guiding you to accurate, trustworthy, and valuable insights.

Similar Posts